예약 고객 졀재 상품입니다.

TM NEXT GEN전용 전자회로입니다.

TM M4계열만 가능하며 TM AK모델에는 장착 불가 입니다.

 Smartphone/Tablet App

iPhone Requirements ▪ Hardware: 4S or newer models ▪ Software: iOS 7.0 or above

Android Requirements ▪ Hardware: Any with Bluetooth 4.0 or above ▪ Software: Android 4.3 or above

Advanced Technology

• Can handle power surges up to 9000 watts and even run on car batteries.
• Fully computerized with hi-speed dual ARM Cortex-M0 and PIC18F26K22 microprocessors.
• Multiple internal layers of heavy copper traces for greater current capacity.
• Short circuit detection and voltage spike suppression circuits to protect the controller.
• Smart thermal management reduces heat buildup during sustained firing on certain settings.

Smartphone Bluetooth Interface

• Quickest and most versatile method of programming AEGs. No complex trigger inputs or opening the AEG.
• Program your AEG mid-skirmish in seconds without any tools or manual, just your smartphone only.
• User-programmable passcode and a shortened signal range prevents any unauthorized setting changes.
• No need to "pre-connect" to the Spectre in the smartphone's settings. Is accessed instantly from within the app.
• Fully certified by the FCC (USA), IC (Canada), CE (Europe), and 日本電波法 (Japan).

Essential App for Techs

• Smartphone app reports battery voltage, current draw, and FET temperature. Basically a "wireless multimeter".
• Reports timing of shot cycles and RoF, which helps fine-tuning the AEG to achieve the best possible cycle rate.
• Diagnostic functions that display which microswitches are pressed in real-time and also what error has occurred.
• Records total number of shots fired since the battery was connected and also for each trigger pull.

MOSFET Trigger

• Eliminates damaging electrical arcing of the trigger switch contacts.
• Lower resistance compared to mechanical switching, increasing motor current.
• Driven by dual IRF671812PBF, a compact yet powerful next-gen MOSFET.

Dynamic Braking

• Eliminates the motor spin-down time to prevent the piston from over-traveling.
• Assists in keeping the piston properly reset to reduce stress on the gearbox.
• Prevents double firing on semi-fire in extremely high RoF setups.
• Also driven by dual IRF671812PBF MOSFETs.

Cycle Completion

• Gearbox always completes the last cycle regardless of when the trigger is released.
• Assists in keeping the piston properly reset to reduce stress on the gearbox.
• The motor will always have the smoothest and most consistent startup.
• Allows the anti-reversal latch to be removed.

Configurable Triple Fire Select

• All three fire select positions can be individually configured, for a total of 729 (9x9x9) possible configs.
• Available options for each selector position:
• Safe
• Semi fire
• Auto fire
• Burst [non-interruptible]
• Burst [interruptible]
• Burst/Auto hybrid [burst non-interruptible]
• Burst/Auto hybrid [burst interruptible]
• Semi/Auto hybrid
• Semi/Auto ramping
• Non-interrupt burst completes a burst even if the trigger is released, whereas interruptable stops mid-burst.
• Burst modes can be programmed to fire 2 - 10 shots per burst. Each selector can have different burst amounts.
• "Burst/Auto hybrid" fires in burst and switches to full auto if the trigger remains held down.
• Hybrid modes can be programmed to have no transition delay or a 0.2s - 1s delay.
• "Semi/Auto ramping" fires in semi and switches to full auto if the trigger is rapidly tapped.

Hardware Semi-Only Lock

• Can only be enabled/disabled by using a soldering iron to remove/bridge a solder jumper.
• Conforms to semi-only laws that forbid AEGs with readily accessible means of bypassing semi-only.

Realistic RoF Control

• Both fire select positions can be individually configured with a different RoF.
• Every cycle runs at full speed and pauses between each shot to reduce the RoF.
• Provides the most realistic feel and sound compared to any other forms of RoF reduction.

Adjustable Precocking

• Precocking stops the piston in a compressed state so the next shot is near-instantaneous.
• The precocking is fully adjustable and thus also compatible with short-stroked pistons.
• Offers improved realism and trigger response for sniper or low RoF builds.

Adjustable Firing Interval

• After a semi or burst fire, ignores trigger inputs for a certain amount of time. Programmable up to 1s.
• Helps restrict rapid firing in specialized builds, such as limiting a sniper build to firing one shot per second.
• Lower intervals can also help prevent accidental "bump firing" on semi when using a feather trigger.

LiPo / LiFePO₄ Monitoring

• Monitors LiPo and LiFePO₄ batteries to cutoff power before overdischarge occurs.
• Simply set the number of cells and the controller will use the proper cutoff voltage.

Programmable Digital Fuse

• Sensor-based current monitoring negates the need for a physical fuse.
• Cutoff threshold fully adjustable to help protect low-output batteries from over-current damage.

Gearbox Reliability

• Eliminates the trigger jam normally caused by the cutoff lever stopping at a certain position.
• The cutoff lever mechanism is no longer needed, greatly reducing the chances of semi-fire related issues.
• The anti-reversal latch can also be removed to make gearbox reassembly much easier.